Rinsing Reverse Osmosis Unit
Rinsing Reverse Osmosis units is easier than most people think, Depending on what type of unit the user may have the technique will very. For a under the counter water filter unit turn off the water supply first. Then open the fixture to let air escape. Then you need to remove the unit and dismantle according to directions in the owners manual. The unit should be cleaned with bleach and water according to the owners manual. After cleaning is complete, reassemble the unit and re-install in the cabinet or under the sink. Connect the fittings. Before turning on the water supply open the fixture and then turn the water supply on slowly to allow any air to be pushed out.
Pre Cleaning Reverse Osmosis Unit
Most manufacturers of Reverse Osmosis Units recomend that the installer pre clean the unit and all related parts and fixtures to remove any dirt and residew related to manufacturing
Flushing Reverse Osmosis Unit
Flushing Reverse Osmosis Units should be performed by a licensed plumber due to pressures that are inherent in pressurized potable water systems. I most instances the inner filter are removed and the unit is reassembled and pressurized for the flushing process.